Floor Stripper and Floor Finish Basics

In the event that you want to offer floor care services for resilient tile into your cleaning business, you will need to understand some of the vocabulary to be able to understand how the chemicals work. Following are some of the faculties for floor strippers and finishes, as well as definitions of a few of this terminology you need to understand.

* the point of floor spraying chemicals would be to dissolve the existing floor finish, therefore it could be Orange County Strippers without harming the floors.

* Floors strippers possess a high pH, usually between 10 to 14. High pH compounds are all on the alkaline side of the pH scale.

* Most floor strippers contain elevated quantities of VOC’s (anywhere from 10 percent to 30%), that may be harmful to the environment. There are currently”more economical” other floor strippers, which contain lower quantities of VOC’s (as low as 6%), if you want to offer green floor care services.

* Strippers are created to make use of an floor cleaning system, and that means you need to use a stripper that’s intended to utilize a particular floor finish.

Traits of Floor Finishes:

* Floors finish is actually a liquid placed on a clear floor in thin layers, so as a way to protect it from damage along with everyday use. Floor finishes are used on floors that aren’t damaged by water, such as VCT (vinyl composition tile).

* Floors finish is primarily composed of polymers, waxes, solvents, plasticizers, and surfactants.

* Floor finishes are created to work with a floor cleaning procedure, which means you want to utilize a floor finish that’s designed to assist a particular lineup of daily cleansers, burnishing chemicals, and floor strippers.

Definitions:

* pH Scale – Determines the acidity or alkalinity of a solution. The scale ranges from 0 to 14. At the 6 conclusion of the scale is really where solutions are contaminated. At the 8 to 14 close of this scale is at which solutions are more alkaline. Pure water has a pH of 7, which is neutral.

* VOC (volatile organic compound) – Organic compounds that produce vapors that may be bad for the environment.

* Solids – What’s left over to the floor surface after the floor finish cures. Usually expressed as a proportion of fat loss. The higher the percentage, the greater coating that’s left over the floor once it melts. But, remember that a high solid content will not necessarily indicate the conclusion has better durability or gloss.

* Polymer – Synthetic compounds of usually high molecular weight. The solids content of the floor finish usually contains 50% – this is what forms the film on to the ground, and that is exactly what provides finish its shine and durability.

* Wax Emulsions – Wax consists of anywhere from 5 – 20 percent of their flooring finish, and that is exactly what empowers the floor to be”buffed”. Synthetic waxes have now replaced natural waxes due to their slide resistance, black mark resistance, and durability.

* Plasticizers – Substances added into floor finish to keep it soft and pliable. Plasticizers permit the chemicals to come with each other to form a film without flaws and imperfections. They also help the finish to be impact resistant.

* Surfactants – Employed to boost the touch of a few substances, sometimes called wettability. This allows the floor finish to be dispersed more readily on the ground floor.

Stop by your regional janitorial supply house for more information on the products they carry. Again, do not use a stripper out of 1 product line and a finish from another line, etc.. Floor care products are designed to work together as a ground care system. There are many lines to pick from so ask a great deal of questions of one’s supplier prior to picking a line to utilize.

Leave a Reply

Your email address will not be published. Required fields are marked *